📈 Live Market Tracking
Every NSE and BSE corporate filing, read and explained by AI within minutes — impact, key figures, short/long-term view and what to watch.
Live · AI analyzer runs every 5 min (07:00–23:55 IST)
0 analysed today
FollowTelegram
0
Today
152,139
All-time analysed
43,645
Positive
6,747
Negative
92,898
Neutral
8,781
Watch
📊 Last 7 days — analysed filings by sentiment
Note: These are AI-generated, educational summaries of public NSE
filings — grounded in each document, but not investment advice and possibly incomplete.
Verify against the original filing and consult a SEBI-registered adviser before acting.
29 announcements match the current filters (relevance ≥ 5).
Mold-Tek Technologies to Raise ₹4.76 Crore via Preferential Issue to US-based Investor
Mold-Tek Technologies Limited has called for an Extraordinary General Meeting (EGM) on March 30, 2026, to approve a preferential issue of equity shares. The company intends to issue 2,90,000 equity shares at a price of ₹164 per share to Mr. Richard Leon Cannyn, a non-promoter individual. This transaction will result in a capital infusion of approximately ₹4.76 Crores. The issue price represents a face value of ₹2 and a premium of ₹162 per share.
Key Highlights
Preferential allotment of 2,90,000 equity shares to a non-promoter individual investor.
Total fundraise amount is approximately ₹4.756 Crores at an issue price of ₹164 per share.
Relevant date for price determination was set as February 27, 2026.
EGM scheduled for March 30, 2026, with remote e-voting available from March 26 to March 29, 2026.
The shares issued will be subject to a statutory lock-in period as per SEBI ICDR Regulations.
👀 What to Watch
Investors should note the entry of a foreign individual investor and monitor the company's disclosure regarding the specific use of these funds for growth or debt reduction. The equity dilution from this specific issue is relatively small but indicates management's intent to bring in external capital.
Mold-Tek Technologies to Raise Rs 4.76 Crore via Preferential Issue at Rs 164/Share
Mold-Tek Technologies has approved the issuance of 2,90,000 equity shares on a preferential basis to a non-promoter investor, Mr. Richard Leon Cannyn. The shares are priced at Rs 164 each, representing a significant premium over the face value of Rs 2. The total fundraise amounts to approximately Rs 4.76 crore, which will result in the investor holding a 0.997% stake in the company post-allotment. An Extraordinary General Meeting (EGM) is scheduled for March 30, 2026, to seek shareholder approval for the transaction.
Key Highlights
Issuance of up to 2,90,000 equity shares at an issue price of Rs 164 per share.
Total fundraise amount aggregates to Rs 4,75,60,000 from a single non-promoter investor.
The investor, Richard Leon Cannyn, will hold a 0.997% stake in the company post-issue.
Relevant date for pricing as per SEBI ICDR Regulations is February 27, 2026.
Extraordinary General Meeting (EGM) to be held on March 30, 2026, for shareholder approval.
👀 What to Watch
Investors should note the equity dilution of approximately 1% and monitor how the company intends to utilize these funds for growth. The preferential pricing provides a benchmark for the company's current valuation assessment by external investors.
Mold-Tek Technologies to Raise ₹4.76 Crore via Preferential Issue at ₹164 Per Share
Mold-Tek Technologies has approved a preferential allotment of 2,90,000 equity shares to a non-promoter investor, Mr. Richard Leon Cannyn. The shares are priced at ₹164 each, which includes a premium of ₹162, totaling a fundraise of approximately ₹4.76 crore. This issuance will result in the investor holding a 0.997% stake in the company post-allotment. Shareholders will vote on this proposal at an Extraordinary General Meeting (EGM) scheduled for March 30, 2026.
Key Highlights
Issuance of up to 2,90,000 equity shares at a price of ₹164 per share.
Total capital infusion of ₹4,75,60,000 from a single non-promoter investor.
Post-issue, the investor Mr. Richard Leon Cannyn will hold a 0.997% stake in the company.
Extraordinary General Meeting (EGM) convened for March 30, 2026, to seek shareholder approval.
Relevant date for determining the floor price was set as February 27, 2026.
👀 What to Watch
The fundraise is relatively small but positive as it brings in fresh capital at a premium to face value. Investors should monitor the EGM outcome and the company's plans for utilizing these funds for growth.
Mold-Tek Technologies to Raise Rs 4.76 Crore via Preferential Issue at Rs 164/Share
Mold-Tek Technologies has approved the issuance of 2,90,000 equity shares on a preferential basis to a non-promoter investor, Mr. Richard Leon Cannyn. The shares are priced at Rs 164 each, representing a significant premium over the face value of Rs 2. The total fundraise amounts to approximately Rs 4.76 crore, with the investor set to hold a 0.997% stake post-allotment. An Extraordinary General Meeting is scheduled for March 30, 2026, to obtain shareholder approval for this transaction.
Key Highlights
Issuance of 2,90,000 equity shares at a fixed price of Rs 164 per share
Total capital infusion of approximately Rs 4.76 crore from a non-promoter investor
Post-allotment, the identified investor will hold a 0.997% stake in the company
Extraordinary General Meeting (EGM) scheduled for March 30, 2026, for approval
Relevant date for pricing determination set as February 27, 2026
👀 What to Watch
Investors should view this as a minor positive due to the capital infusion at a premium, though the dilution is minimal at less than 1%. Monitor the EGM outcome and any further disclosures regarding the specific use of these funds for business expansion.
Mold-Tek Technologies to Raise ₹4.76 Crore via Preferential Issue at ₹164 per Share
Mold-Tek Technologies' board has approved a preferential allotment of 2,90,000 equity shares to a non-promoter investor, Mr. Richard Leon Cannyn. The shares are priced at ₹164 each, including a premium of ₹162, aggregating to a total fundraise of approximately ₹4.76 crores. This issuance will result in the investor holding a 0.997% stake in the company post-allotment. An Extraordinary General Meeting (EGM) is scheduled for March 30, 2026, to seek shareholder approval for this capital infusion.
Key Highlights
Board approved issuance of 2,90,000 equity shares at a price of ₹164 per share
Total capital to be raised through this preferential allotment is ₹4,75,60,000
The shares are being allotted to a single non-promoter investor, Mr. Richard Leon Cannyn
Post-allotment, the investor will hold a 0.997% stake in the company
Extraordinary General Meeting (EGM) for shareholder approval is set for March 30, 2026
👀 What to Watch
The fundraise is relatively small in scale but indicates external investor interest; shareholders should monitor the company's plans for utilizing this capital. No immediate action is required as the dilution is minimal at less than 1%.
Mold-Tek Technologies Q3 Profits Surge 6x YoY; Targets $25M Revenue in FY27
Mold-Tek Technologies reported a stellar Q3 FY26 with profits growing over sixfold year-on-year and 20.2% sequentially. The company is aggressively restructuring its underperforming automotive division, reducing headcount from 160 to 60 to focus on high-growth areas like transmission poles and data centers. Management has set a revenue target of $25 million (approx. INR 225-230 crores) for next year, driven by the integration of the Beryl acquisition and offshoring benefits. The company aims for a 20-25% CAGR over the next 3-5 years through organic growth and further strategic acquisitions.
Key Highlights
Q3 FY26 profits increased by more than 6x YoY and 20.2% on a QoQ basis.
Revenue guidance for FY27 set at $25 million, representing a significant jump from the estimated INR 180 crores in FY26.
Beryl acquisition contributed $137,000 (INR 1.25 crores) in operating profit during its first two months of operations.
Mechanical Engineering (MES) division is being downsized from 160 to 60 members to eliminate losses and improve efficiency.
Data center projects are expected to contribute $2.5 million to $3.5 million in incremental annual revenue across civil and mechanical segments.
👀 What to Watch
Investors should view the aggressive cost-cutting in the automotive segment and the successful integration of Beryl as strong catalysts for margin expansion. Monitor the company's ability to transition Beryl's high-cost US operations to its Indian back-office to realize projected profitability gains.
Mold-Tek Tech Q3 PAT Surges 617% YoY to ₹3.89 Cr; Revenue Up 57%
Mold-Tek Technologies reported a robust recovery in Q3 FY26, with consolidated revenue growing 56.7% YoY to ₹52.67 crore. Net profit witnessed a massive surge of 617% YoY, reaching ₹3.89 crore compared to a low base of ₹0.54 crore in the previous year. While the quarterly performance is strong, the nine-month PAT of ₹7.81 crore still lags behind the ₹13.73 crore earned in the same period last year. The company's US-based subsidiaries remain integral to its consolidated performance.
Key Highlights
Consolidated Revenue from operations grew 56.7% YoY to ₹5,266.70 lakhs in Q3 FY26.
Consolidated Net Profit (PAT) jumped to ₹388.85 lakhs from ₹54.19 lakhs in the year-ago quarter.
Earnings Per Share (EPS) for the quarter improved significantly to ₹1.35 from ₹0.19 YoY.
Nine-month consolidated revenue stands at ₹12,618.92 lakhs, up from ₹11,597.25 lakhs YoY.
Employee benefit expenses increased to ₹3,758.74 lakhs this quarter, up from ₹2,662.18 lakhs YoY.
👀 What to Watch
The sharp YoY and QoQ recovery in profitability indicates a strong turnaround in business momentum. Investors should monitor the sustainability of this margin expansion in upcoming quarters to see if the 9-month profit gap can be narrowed.
Mold-Tek Technologies Q3 Net Profit Jumps to ₹3.89 Cr; Revenue Up 57% YoY
Mold-Tek Technologies reported a robust consolidated performance for Q3 FY26, with revenue from operations rising 56.7% YoY to ₹5,266.70 lakhs. Net profit for the quarter saw a significant recovery, reaching ₹388.85 lakhs compared to ₹54.19 lakhs in the same period last year. Despite the strong quarterly surge, the nine-month PAT of ₹780.84 lakhs still trails behind the ₹1,372.83 lakhs earned in the previous year's corresponding period. The company's US-based engineering subsidiaries remain a core driver of its consolidated financial structure.
Key Highlights
Consolidated Revenue from operations increased 56.7% YoY to ₹5,266.70 lakhs.
Net Profit (PAT) for Q3 FY26 surged to ₹388.85 lakhs from ₹54.19 lakhs in Q3 FY25.
Earnings Per Share (EPS) for the quarter improved to ₹1.35 from ₹0.19 YoY.
Employee benefit expenses remain the largest cost factor, accounting for ₹3,758.74 lakhs in Q3.
Nine-month consolidated revenue grew to ₹12,618.92 lakhs, though 9M PAT remains 43% lower than the previous year.
👀 What to Watch
The sharp recovery in Q3 margins and profitability suggests a positive turnaround in business momentum. Investors should watch if this growth trajectory continues in Q4 to fully offset the weaker performance seen earlier in the fiscal year.
Mold-Tek Tech Q3 Consolidated Net Profit Jumps to ₹3.89 Cr; Revenue Up 57% YoY
Mold-Tek Technologies reported a strong consolidated performance for Q3 FY26, with revenue growing 56.7% year-on-year to ₹5,266.70 lakhs. Consolidated net profit saw a massive surge to ₹388.85 lakhs compared to just ₹54.19 lakhs in the same quarter last year. However, on a nine-month basis, the net profit of ₹780.84 lakhs remains significantly lower than the ₹1,372.83 lakhs recorded in the previous year's corresponding period. The company's US subsidiaries appear to have contributed significantly to the consolidated revenue growth during this quarter.
Key Highlights
Consolidated Revenue for Q3 FY26 rose 56.7% YoY to ₹5,266.70 lakhs from ₹3,359.89 lakhs.
Consolidated Net Profit surged to ₹388.85 lakhs from ₹54.19 lakhs in the year-ago quarter.
Consolidated EPS increased to ₹1.35 for the quarter, up from ₹0.19 in Q3 FY25.
Standalone Revenue showed a slight sequential decline to ₹3,626.52 lakhs from ₹3,724.80 lakhs in Q2 FY26.
9-month consolidated profit stands at ₹780.84 lakhs, down 43% compared to ₹1,372.83 lakhs in the previous year.
👀 What to Watch
The sharp recovery in Q3 profit margins compared to the previous year is highly encouraging, though the 9-month cumulative profit is still lagging. Investors should monitor if this quarterly momentum in the US subsidiaries is sustainable before taking long-term positions.
