📈 Live Market Tracking
Every NSE and BSE corporate filing, read and explained by AI within minutes — impact, key figures, short/long-term view and what to watch.
Live · AI analyzer runs every 5 min (07:00–23:55 IST)
0 analysed today
FollowTelegram
0
Today
152,139
All-time analysed
43,645
Positive
6,747
Negative
92,898
Neutral
8,781
Watch
📊 Last 7 days — analysed filings by sentiment
Note: These are AI-generated, educational summaries of public NSE
filings — grounded in each document, but not investment advice and possibly incomplete.
Verify against the original filing and consult a SEBI-registered adviser before acting.
58 announcements match the current filters (relevance ≥ 5).
Shyam Metalics Commissions Phase II CRM Facility; Total Capacity Reaches 0.40 MTPA
Shyam Metalics has successfully commissioned Phase II of its Cold Rolling Mill (CRM) facility at Jamuria, West Bengal, adding 0.15 MTPA of capacity. This expansion brings the total installed CRM capacity to 0.40 MTPA, focusing on high-margin value-added products like Galvalume. The facility is strategically positioned to serve the solar energy, automotive, and consumer durables sectors, aiming to reduce import dependency. The project is part of the Government's PLI 2 Scheme, which is expected to enhance the return profile and EBITDA margins over the medium term.
Key Highlights
Commissioned 0.15 MTPA Phase II CRM facility, increasing total capacity to 0.40 MTPA.
New Dual Pot GI cum Galvalume line targets high-growth solar, automotive, and appliance sectors.
Project is eligible for benefits under the Government’s PLI 2 Scheme for advanced manufacturing.
Management expects optimal production ramp-up within the next 10–12 months.
Strategic focus on import substitution for solar panel mounting structures.
👀 What to Watch
This expansion into high-margin value-added steel is a positive driver for long-term profitability and margin expansion. Investors should monitor the utilization rates and the resulting impact on blended EBITDA per tonne in upcoming quarters.
Shyam Metalics Expands Colour Coated Sheet Capacity to 0.40 MTPA via Phase II Commissioning
Shyam Metalics and Energy Limited has successfully commissioned Phase II of its Cold Rolling Mill facility at the Jamuria plant through its subsidiary, Shyam Sel and Power Limited. This expansion adds 0.15 MTPA of incremental capacity for Colour Coated Sheets, bringing the total installed capacity to 0.40 MTPA. The move is part of a phased strategy to increase the company's footprint in the high-margin value-added steel segment. Commercial production for this new phase commenced on April 16, 2025.
Key Highlights
Added 0.15 Million Tonnes Per Annum (MTPA) capacity for Colour Coated Sheets
Total facility capacity increased by 60% from 0.25 MTPA to 0.40 MTPA
Successful commissioning of Phase II of the Cold Rolling Mill (CRM) facility at Jamuria
Focus on strengthening presence in the value-added steel segment to enhance competitiveness
👀 What to Watch
Investors should monitor the ramp-up of this new capacity and its impact on the company's margins, as value-added products typically offer higher profitability than commodity steel.
Shyam Metalics Receives CPCB Relief for Rengali Plant; Operations to Resume
Shyam Metalics and Energy Limited has successfully obtained relief from the Central Pollution Control Board (CPCB) regarding closure orders for its Pellet, Ferro Alloys, and Power plants at the Rengali facility in Odisha. The initial closure directions were issued due to pollution-related non-compliances, but the CPCB has now authorized the resumption of operations following the company's remedial representations. The company has been granted a 3-month period to ensure full compliance with all environmental observations. This announcement serves to clarify social media rumors and confirms that the impact was limited to specific units rather than the entire facility.
Key Highlights
Relief obtained for closure directions affecting one Pellet Plant, Ferro Alloys Plant, and Power Plant at Rengali.
CPCB has directed the Odisha State Pollution Control Board (OSPCB) to facilitate the resumption of operations.
The company has been provided a 3-month window to achieve 100% compliance with all environmental findings.
Clarification issued to counter social media rumors and confirm that other operations remained unaffected.
👀 What to Watch
The lifting of the closure order removes a significant operational hurdle and potential revenue loss; investors should monitor the company's adherence to the 3-month compliance timeline to ensure no further regulatory friction.
Shyam Metalics Feb 2026: Strong Realization Growth Offsets Mixed Volume Performance
Shyam Metalics reported a robust increase in average realizations across all segments for February 2026, with Stainless Steel and Pig Iron leading at 18.8% and 15.6% YoY growth respectively. Volume performance was mixed; CR Coil/Sheets and Pig Iron saw massive YoY jumps of 169% and 75%, while Aluminium Foil and Sponge Iron volumes declined. A notable concern is the 45.3% MoM drop in Pellet volumes, although YoY growth remains positive at 30.7%. The company continues to benefit from its diversified product mix and integrated operations.
Key Highlights
Stainless Steel realizations rose 18.81% YoY to Rs. 1,53,537/MT despite a 3.1% volume dip
CR Coil/Sheets volumes grew by 169.15% YoY to 15,221 MT with realizations up 14.58%
Pig Iron sales volume increased 75.36% YoY with a 15.63% rise in realizations
Pellet volumes grew 30.67% YoY to 60,613 MT but fell 45.3% on a MoM basis
Carbon Steel volumes showed steady growth of 7.88% YoY with realizations up 4.7%
👀 What to Watch
Investors should monitor if the improved realizations can continue to offset volume volatility in key segments like Pellets and Aluminium Foil. The stock remains a long-term play on integrated steel capacity and value-added product expansion.
Shyam Metalics Assigned Voluntary ESG Rating of 63.7 by SES ESG Research
Shyam Metalics and Energy Limited has been assigned an ESG rating of 63.7 by SES ESG Research Pvt. Ltd., a SEBI-registered provider. The rating is based on the company's publicly available data for the financial year 2024-25. Notably, the assessment was conducted independently by the research firm without direct engagement or solicitation from the company. This voluntary disclosure highlights the company's commitment to transparency and its standing in environmental, social, and governance metrics within the metal industry.
Key Highlights
Assigned an ESG rating of 63.7 by SEBI-registered SES ESG Research Pvt. Ltd.
Rating is based on public domain data pertaining to the financial year 2024-25.
The assessment was done independently and was not engaged by the company.
The rating was officially communicated to the company on February 13, 2026.
👀 What to Watch
Investors should view this as a positive step towards corporate transparency, which may improve the company's attractiveness to ESG-focused institutional funds. No immediate portfolio changes are necessary, but it strengthens the long-term governance profile of the firm.
Shyam Metalics Jan 2026 Sales: Pig Iron Volumes Surge 348% YoY, Pellets Up 42%
Shyam Metalics reported a mixed but largely positive performance for January 2026, driven by massive volume growth in newly expanded segments. Pig Iron sales surged 347.94% YoY and CR Sheets grew 620.08% YoY following the commissioning of new plants in late 2024. While core segments like Sponge Iron and Carbon Steel saw volume declines of 20.90% and 4.52% respectively, realizations across most product categories remained firm or improved YoY. The company is successfully transitioning towards higher-value downstream products like color-coated sheets and specialty alloys.
Key Highlights
Pig Iron sales volume surged 347.94% YoY to 63,972 MT with realizations up 6.21% to Rs. 35,343/MT.
CR Coil/Sheets volumes grew 620.08% YoY to 17,887 MT following the ramp-up of the Jamuria color-coated plant.
Pellet sales increased 42.14% YoY to 1,10,812 MT with a 5.76% improvement in realization.
Stainless Steel realizations rose 11.43% YoY to Rs. 1,40,171/MT despite a 5.36% dip in sales volume.
Sponge Iron witnessed a significant decline, with volumes falling 20.90% YoY and realizations down 2.17%.
👀 What to Watch
Investors should focus on the successful ramp-up of new capacities in Pig Iron and CR Sheets which are offsetting weakness in the Sponge Iron segment. The improving realization trends in Stainless Steel and Aluminium Foil suggest better margin potential in value-added products.
Shyam Metalics Q3 FY26 Revenue Up 18% to ₹4,421 Cr; New ₹6,660 Cr Capex Approved
Shyam Metalics and Energy Limited reported a robust Q3 FY26 with revenue reaching ₹4,421.5 crore, marking an 18% growth driven by a 25% increase in volumes. The company has maintained its streak of profitability since 2005 and recently achieved a credit rating upgrade to CRISIL AA+ (Stable). A significant new capital expenditure of ₹6,660 crore has been approved to focus on value-added segments, aiming for a 2.5x growth in revenue and EBITDA by FY31. The company continues to benefit from high operational efficiency, sourcing 83% of its power from captive plants at a low cost of ₹2.44/Kwh.
Key Highlights
Q3 FY26 Revenue grew 18% YoY to ₹4,421.5 crore with a 25% increase in sales volumes.
Approved fresh Capex of ₹6,660 crore to drive value-added growth and enhance margins.
Long-term credit rating upgraded by CRISIL to AA+ (Stable) from AA (Positive).
Captive power plants supplied 83% of power requirements at ₹2.44/Kwh, significantly lower than grid costs.
Management targets 2.5x growth in Revenue and EBITDA by FY31 through internal accruals and disciplined capital allocation.
👀 What to Watch
Investors should note the company's aggressive expansion into value-added products and its strong credit profile. The focus on low-cost captive power and internal accrual-funded growth makes it a resilient play in the metal sector.
SMEL Q3 FY26: Revenue Up 18%, Volumes Up 25%, Board Approves ₹6,660 Cr Fresh Capex
Shyam Metalics (SMEL) reported a robust 17.7% YoY revenue growth to ₹4,421 crore for Q3 FY26, supported by a significant 25% increase in sales volumes. While EBITDA grew 6.3% to ₹539 crore, Profit After Tax remained nearly flat at ₹198 crore as EBITDA margins compressed from 13.5% to 12.2% YoY. A major strategic highlight is the Board's approval of a massive ₹6,660 crore fresh CAPEX plan focused on capacity expansion and backward integration. Additionally, the company commissioned a new 0.45 MTPA blast furnace at its Kharagpur plant, strengthening its integrated manufacturing footprint.
Key Highlights
Revenue grew 17.7% YoY to ₹4,421 crore driven by a 25% surge in overall sales volumes.
Board approved a significant fresh CAPEX of ₹6,660 crore to drive value-added growth and enhance margins.
EBITDA increased 6.3% YoY to ₹539 crore, though EBITDA margins declined to 12.2% from 13.5% YoY.
Iron Pellet volumes saw a massive 43% YoY growth, while Stainless Steel realizations improved by 11.3% YoY.
Successfully commenced commercial production of a 0.45 MTPA blast furnace at the Kharagpur plant.
👀 What to Watch
Investors should focus on the aggressive ₹6,660 crore expansion plan which signals strong long-term growth visibility, despite current margin pressure. The company's ability to drive high volume growth and its move towards value-added products makes it a strong contender in the integrated metal space.
Shyam Metalics Announces Mega Capex of ₹6,660 Crore for Expansion and New Projects
Shyam Metalics has approved a massive capital expenditure plan totaling ₹6,660 crore to be funded via internal accruals and debt. The largest portion, ₹5,400 crore, is allocated for a Hot Rolling Mill & Furnace with a capacity of 15.8 lakh TPA, expected by September 2029. Other projects include wagon manufacturing, power plant expansion, and blast furnace upgrades scheduled for completion between 2027 and 2029. Additionally, the company is liquidating its non-operational Dubai subsidiary and has appointed industry veteran Mr. Subrata Bhattacharya to its board.
Key Highlights
Approved total capital expenditure of ₹6,660 crore for multiple expansion projects across subsidiaries.
Major investment of ₹5,400 crore for a 15,80,000 TPA Hot Rolling Mill & Furnace by September 2029.
Expansion of Blast Furnace and Coke Oven capacities with a combined estimated cost of ₹610 crore.
Setting up a new Wagon Manufacturing facility (4,800 wagons/annum) and an 80 MW Power Plant by 2027.
Voluntary liquidation of non-operational Dubai-based step-down subsidiary SMIDMCC due to geopolitical uncertainties.
👀 What to Watch
Investors should view this as a strong long-term growth signal, though the long gestation period for the Hot Rolling Mill (2029) requires patience. Monitor the funding mix and debt levels as these projects progress.
Shyam Metalics Announces Massive ₹6,660 Crore CAPEX Plan and Capacity Expansions
Shyam Metalics and Energy Limited has approved a significant capital expenditure plan totaling ₹6,660 crore to enhance manufacturing capacity and operational efficiency. The largest component is a ₹5,400 crore Hot Rolling Mill and Furnace project expected by September 2029. Other projects include a new wagon manufacturing facility, an 80 MW power plant, and multiple blast furnace expansions slated for completion by 2027. The company also announced the liquidation of its non-operational Dubai subsidiary and the appointment of industry veteran Mr. Subrata Bhattacharya as an Independent Director.
Key Highlights
Approved total capital expenditure of ₹6,660 crore for five major expansion projects
Investing ₹5,400 crore in a 1.58 MTPA Hot Rolling Mill & Furnace targeted for September 2029
Establishing a 4,800 wagons per annum manufacturing facility at Kharagpur for ₹200 crore
Expanding Blast Furnace and Coke Oven capacities with a combined investment of ₹610 crore by June 2027
Voluntary liquidation of non-operational step-down subsidiary Shyam Metalics International DMCC in Dubai
👀 What to Watch
Investors should monitor the execution timelines of these large-scale projects and the impact on the company's leverage, as funding will involve a mix of internal accruals and debt. The massive scale of expansion signals strong management confidence in long-term steel demand and vertical integration.
Shyam Metalics Approves Massive ₹6,660 Crore CAPEX Plan for Capacity Expansion
Shyam Metalics has announced a significant capital expenditure plan of ₹6,660 crore to aggressively expand its manufacturing footprint and operational efficiency. The largest portion, ₹5,400 crore, is earmarked for a 15.80 lakh TPA Hot Rolling Mill and Furnace expected by September 2029. The plan also includes a diversification into wagon manufacturing (4,800 units/year) and substantial capacity hikes in blast furnaces and power generation. To streamline operations, the company is liquidating its non-operational Dubai subsidiary and has strengthened its board with the appointment of steel industry veteran Mr. Subrata Bhattacharya.
Key Highlights
Approved total capital expenditure of ₹6,660 crore for five major expansion projects across steel, power, and manufacturing.
Largest investment of ₹5,400 crore for a 15.80 lakh TPA Hot Rolling Mill & Furnace, targeted for completion by September 2029.
Diversification into wagon manufacturing with a 4,800 wagons per annum facility at Kharagpur at a cost of ₹200 crore.
Capacity expansion of Blast Furnaces by over 3,10,000 TPA and addition of an 80 MW power plant at Sambalpur by June 2027.
Appointment of Mr. Subrata Bhattacharya, former Whole-time Director at Jindal Stainless, as an Independent Director for 5 years.
👀 What to Watch
The massive CAPEX plan signals a major growth phase that will significantly scale up the company's revenue base over the next 3-5 years. Investors should monitor the debt-to-equity mix for funding these projects and the execution progress of the high-value Hot Rolling Mill.
Shyam Metalics Approves ₹6,660 Crore Capex for Expansion and Q3 FY26 Results
Shyam Metalics and Energy Limited has announced a massive capital expenditure plan totaling ₹6,660 crore to significantly expand its manufacturing capacities and operational efficiency. The largest portion of this investment, ₹5,400 crore, is dedicated to a new Hot Rolling Mill & Furnace with a 15.80 lakh TPA capacity, expected to be commissioned by September 2029. The board also approved the voluntary liquidation of its non-operational Dubai-based subsidiary to eliminate recurring compliance costs. Additionally, the company reported its Q3 FY26 financial results and appointed industry veteran Mr. Subrata Bhattacharya as an Independent Director.
Key Highlights
Approved total capital expenditure of ₹6,660 crore for multiple expansion projects across India.
Allocated ₹5,400 crore for a 15.80 lakh TPA Hot Rolling Mill & Furnace, targeted for completion by September 2029.
Planned ₹450 crore investment for an 80 MW Power Plant at Sambalpur and ₹200 crore for a Wagon Manufacturing facility.
Blast Furnace and Coke Oven expansions totaling ₹610 crore are expected to be commissioned by June 2027.
Voluntary liquidation of Dubai-based step-down subsidiary SMIDMCC approved due to geopolitical uncertainties and lack of operations.
👀 What to Watch
Investors should focus on the massive ₹6,660 crore Capex plan as a long-term growth driver, though execution risk and funding mix should be monitored. The appointment of an experienced Independent Director from the steel industry adds significant governance and technical expertise.
Shyam Metalics Announces Massive ₹6,660 Crore Capex Plan and New Director Appointment
Shyam Metalics and Energy Limited has approved a significant capital expenditure plan totaling ₹6,660 crore to enhance manufacturing capacity and operational efficiency. The largest portion, ₹5,400 crore, is earmarked for a Hot Rolling Mill and Furnace expected by September 2029. The company is also expanding blast furnace capacities, setting up an 80 MW power plant, and a wagon manufacturing unit. Concurrently, the board appointed steel industry veteran Subrata Bhattacharya as an Independent Director and decided to liquidate its non-operational Dubai subsidiary.
Key Highlights
Approved ₹6,660 crore total capex for multiple expansion projects across India
₹5,400 crore allocated for a 15.80 lakh TPA Hot Rolling Mill and Furnace by Sept 2029
New Wagon Manufacturing Facility at Kharagpur with 4,800 wagons/annum capacity (₹200 crore)
Expansion of Blast Furnaces and a new 80 MW power plant at Sambalpur (₹450 crore)
Appointment of Mr. Subrata Bhattacharya (ex-Jindal Stainless) as Independent Director for 5 years
👀 What to Watch
Investors should view the ₹6,660 crore capex as a strong long-term growth catalyst, though the long gestation period for the largest project (2029) requires patience. Monitor the debt-to-equity impact as the company utilizes a mix of internal accruals and borrowings for these projects.
Shyam Metalics Announces Massive ₹6,660 Crore Capex Plan for Capacity Expansion
Shyam Metalics and Energy Limited has approved a significant capital expenditure plan of ₹6,660 crore to enhance its manufacturing capacity and operational efficiency. The largest investment of ₹5,400 crore is dedicated to a new 1.58 MTPA Hot Rolling Mill and Furnace, expected to be commissioned by September 2029. The company is also expanding its blast furnace and coke oven capacities and setting up a wagon manufacturing unit. Additionally, the board approved the liquidation of its non-operational Dubai subsidiary to save on compliance costs and appointed industry veteran Subrata Bhattacharya to the board.
Key Highlights
Approved a total capital expenditure of ₹6,660 crore for multiple expansion projects across steel and power segments.
Allocated ₹5,400 crore for a 15,80,000 TPA Hot Rolling Mill & Furnace, targeted for completion by September 2029.
Investing ₹200 crore in a new Wagon Manufacturing Facility at Kharagpur with a capacity of 4,800 wagons per annum.
Expanding Blast Furnace and Coke Oven capacities with a combined investment of approximately ₹610 crore.
Voluntary liquidation of non-operational step-down subsidiary Shyam Metalics International DMCC (Dubai) due to geopolitical uncertainties.
👀 What to Watch
Investors should view the massive capex plan as a strong long-term growth signal, though execution timelines and funding mix (internal accruals vs. debt) should be closely monitored. The appointment of a seasoned leader from Jindal Stainless to the board strengthens management oversight for these large-scale projects.
Shyam Metalics Announces Massive ₹6,660 Crore Expansion Plan and Q3 Results
Shyam Metalics and Energy Limited has approved a significant capital expenditure plan totaling ₹6,660 crore to enhance its manufacturing capacity and operational efficiency. The centerpiece of this expansion is a ₹5,400 crore investment in a Hot Rolling Mill and Furnace with a 1.58 MTPA capacity, slated for completion by September 2029. Other projects include a new wagon manufacturing facility, blast furnace expansions, and an 80 MW power plant. Additionally, the company is liquidating its non-operational Dubai subsidiary and has appointed Mr. Subrata Bhattacharya, a veteran from Jindal Stainless, as an Independent Director.
Key Highlights
Approved a total capital expenditure of ₹6,660 crore for multiple expansion projects across West Bengal and Odisha.
Allocated ₹5,400 crore for a 15,80,000 TPA Hot Rolling Mill & Furnace expected to be commissioned by September 2029.
Diversifying into wagon manufacturing with a 4,800 wagons per annum facility at Kharagpur costing ₹200 crore.
Expanding blast furnace capacities by a combined 3,10,000 TPA and adding an 80 MW power plant by June 2027.
Voluntary liquidation of non-operational Dubai subsidiary SMIDMCC due to geopolitical uncertainties and lack of strategic viability.
👀 What to Watch
Investors should view the massive ₹6,660 crore capex as a strong signal of long-term growth and vertical integration. Monitor the company's debt-to-equity ratio as they finalize the funding mix for these projects.
Shyam Metalics Dec 2025: Stainless Steel Vol Up 19% YoY, Speciality Alloys Up 50% YoY
Shyam Metalics reported a robust performance in its value-added segments for December 2025, with Stainless Steel volumes growing 19.07% YoY and realizations increasing by 18.18%. Speciality Alloys saw a significant volume surge of 50.05% YoY, while the newly commissioned CR Coil/Sheets plant led to a massive 835.77% YoY volume jump. However, the Carbon Steel segment faced headwinds with volumes and realizations declining by 8.03% and 4.40% YoY, respectively. Overall, the shift toward high-margin products like Stainless Steel and Speciality Alloys remains a key growth driver for the company.
Key Highlights
Stainless Steel volumes rose 19.07% YoY to 9,393 MT with realizations up 18.18% to Rs. 1,44,988/MT.
Speciality Alloys volumes surged 50.05% YoY to 21,759 MT, maintaining strong growth momentum.
CR Coil/Sheets volumes jumped 835.77% YoY to 18,078 MT following the Jamuria plant commissioning in Nov 2024.
Carbon Steel volumes declined 8.03% YoY to 1,45,615 MT with a 4.40% drop in average realizations.
Sponge Iron volumes grew 19.52% YoY to 88,808 MT, although realizations softened by 7.98% YoY.
👀 What to Watch
Investors should view the strong growth in high-margin Stainless Steel and Speciality Alloys as a positive sign of product mix optimization. While Carbon Steel realizations are under pressure, the rapid ramp-up of new capacities in CR Coils and Pig Iron provides a significant volume cushion.
Shyam Metalics Subsidiary RIL Commences 0.45 MTPA Blast Furnace Operations
Shyam Metalics and Energy Limited has announced that its step-down subsidiary, Ramsarup Industries Limited (RIL), has commenced commercial production at its new Modern Blast Furnace and Linear Sinter Plant as of December 30, 2025. The new facility adds a significant production capacity of 0.45 Million Tonnes Per Annum (MTPA), which is expected to bolster the company's overall steel output. The plant is designed with zero process water discharge, emphasizing sustainability and operational efficiency. This expansion aligns with the company's long-term growth strategy to strengthen its market presence in the steel sector.
Key Highlights
Commissioned a Modern Blast Furnace and Linear Sinter Plant at step-down subsidiary Ramsarup Industries Limited
Added 0.45 Million Tonnes Per Annum (MTPA) of production capacity to the group's portfolio
Commercial production officially started on December 30, 2025
Plant features a zero process water discharge design to promote sustainability and process efficiency
👀 What to Watch
Investors should view this capacity addition as a positive catalyst for revenue growth in the coming quarters. Monitor the utilization levels of the new plant and its impact on the company's consolidated margins.
Shyam Metalics: Nov 2025 Sales Update - Pellet sales up 131% YoY
Shyam Metalics and Energy Limited (SHYAMMETL) reported its monthly sales release for November 2025. Pellet sales volume increased significantly by 131.06% YoY. CR Coil/CR Sheets sales volumes saw a massive increase of 1234.68% YoY with realisations up by 25.04%. Pig Iron sales volumes increased by 1865.63% YoY, however, realisations decreased by 11.08%.
Key Highlights
Pellet sales volume increased by 131.06% YoY.
CR Coil/CR Sheets sales volume increased by 1234.68% YoY.
Speciality Alloys sales volume increased by 19.64% YoY.
Pig Iron sales volume increased by 1865.63% YoY.
Stainless Steel sales volume increased by 7.48% YoY.
👀 What to Watch
Investors should monitor the sales trends in the coming months, especially the sustainability of the high growth in CR Coil/CR Sheets and Pig Iron, and the impact of pricing changes on overall profitability.
