📈 Live Market Tracking
Every NSE and BSE corporate filing, read and explained by AI within minutes — impact, key figures, short/long-term view and what to watch.
Live · AI analyzer runs every 5 min (07:00–23:55 IST)
Latest filing: 2026-08-13 16:35
538 analysed today
FollowTelegram
538
Today
149,939
All-time analysed
42,983
Positive
6,669
Negative
91,579
Neutral
8,640
Watch
📊 Last 7 days — analysed filings by sentiment
Note: These are AI-generated, educational summaries of public NSE
filings — grounded in each document, but not investment advice and possibly incomplete.
Verify against the original filing and consult a SEBI-registered adviser before acting.
7 announcements match the current filters (relevance ≥ 5).
Rs 0.77 Cr Net Profit: Metal Coatings India Reports 26% YoY Profit Growth in Q1 FY27
Metal Coatings India reported a positive start to FY27 with revenue growing 9.2% YoY to Rs 38.25 Cr. Net profit increased by 26.2% YoY to Rs 0.77 Cr, representing a significant recovery from the Rs 0.13 Cr reported in the preceding March quarter. The company maintains a lean balance sheet with minimal finance costs of just Rs 0.89 lakhs for the quarter. While margins remain thin in the steel products segment, the Q1 profit already accounts for approximately 38.5% of the total profit generated in the entire previous fiscal year (FY26).
Confidence: HIGH
What changedThe company has reported its Q1 FY27 financial results, showing a recovery in profitability compared to the weak Q4 FY26 and steady growth over Q1 FY26.
Why it mattersFor a micro-cap company with a Rs 40 Cr market cap, the ability to generate nearly 40% of last year's total profit in a single quarter suggests potential for an earnings breakout if margins remain stable.
Revenue (Q1 FY27): Rs 38.25 CrNet Profit (Q1 FY27): Rs 0.77 CrQ1 Profit vs FY26 Total Profit: 38.5%YoY Revenue Growth: 9.2%EPS (Q1 FY27): Rs 1.05
📅 Short termThe stock may see positive interest due to the sharp sequential (QoQ) profit recovery and year-on-year growth in a challenging steel sector environment.
📈 Long termLimited structural change; the company remains a small-scale player in a commodity-sensitive industry with high raw material dependency.
⚠ Risk flags
- High raw material cost sensitivity
- Low operating profit margins (OPM)
- Small market capitalization leading to potential liquidity risks
Key Highlights
Revenue from operations increased 9.2% YoY to Rs 38.25 Cr from Rs 35.03 Cr.
Net profit rose 26.2% YoY to Rs 0.77 Cr compared to Rs 0.61 Cr in the same period last year.
Earnings Per Share (EPS) improved to Rs 1.05 from Rs 0.83 YoY.
Raw material costs remained the largest expense at Rs 31.37 Cr, representing 82% of revenue.
Finance costs were reduced to Rs 0.89 lakhs from Rs 1.02 lakhs YoY.
👀 What to Watch
Investors should monitor raw material price trends as they constitute over 80% of the company's cost structure, directly impacting the thin 2% operating margins. Watch for consistency in quarterly PAT to see if the company can exceed its FY26 performance of Rs 2.0 Cr.
Rs 0.77 Cr PAT: Metal Coatings India Q1 FY27 Profit Grows 26% YoY
Metal Coatings India reported a steady Q1 FY27 with revenue from operations rising 9.2% YoY to Rs 38.25 Cr. Net profit for the quarter stood at Rs 0.77 Cr, a 26.2% increase compared to Rs 0.61 Cr in the same period last year. Sequentially, the performance is a significant recovery from the previous quarter (Q4 FY26), where profit was just Rs 0.13 Cr. Despite the growth, operating margins remain thin at approximately 2.7%, consistent with the company's historical low-margin profile in the iron and steel products segment.
Confidence: HIGH
What changedThe company has reported its unaudited financial results for the first quarter of FY27, showing growth in both top-line and bottom-line figures.
Why it mattersThe results indicate a recovery from a weak Q4 FY26 and show that the company is maintaining its growth trajectory despite being a micro-cap in a highly competitive industry.
Revenue (Q1 FY27): Rs 38.25 CrNet Profit (Q1 FY27): Rs 0.77 CrYoY Revenue Growth: 9.2%Q1 Revenue vs TTM Revenue: 25.6%EPS (Q1 FY27): Rs 1.05
📅 Short termThe stock may see positive sentiment in the short term due to the 26% YoY profit growth and sharp sequential recovery from Q4 FY26.
📈 Long termLimited structural significance given the micro-cap nature and thin operating margins (TTM OPM of 2.0%), making it highly sensitive to cyclical steel prices.
⚠ Risk flags
- Low operating margins
- High raw material cost concentration (82% of revenue)
- Micro-cap liquidity risk
Key Highlights
Revenue from operations grew 9.2% YoY to Rs 38.25 Cr from Rs 35.03 Cr.
Net Profit increased to Rs 0.77 Cr, up from Rs 0.61 Cr in the year-ago quarter.
Basic and Diluted EPS improved to Rs 1.05 from Rs 0.83 YoY.
Cost of materials consumed stood at Rs 31.37 Cr, representing 82% of total revenue.
Total Comprehensive Income for the period reached Rs 0.80 Cr after accounting for other items.
👀 What to Watch
Investors should monitor the sustainability of the sequential margin recovery and track raw material price trends, which significantly impact this low-margin business.
Metal Coatings India FY26: Rs 1 Dividend Declared; Revenue Declines 7% to Rs 148.98 Cr
Metal Coatings India Ltd reported a 7% year-on-year decline in revenue to Rs 148.98 Cr for FY26, attributed to steel industry volatility and geopolitical disruptions in the Middle East. Despite the revenue drop, Net Profit (PAT) remained stable at Rs 2.40 Cr compared to Rs 2.37 Cr in FY25, aided by cost-optimization measures. The Board has recommended a final dividend of Rs 1 per share (10% of face value), representing a 30.53% payout ratio. A significant observation in the report is the Chairman's remuneration of Rs 2.70 Cr, which exceeds the company's total annual profit.
Confidence: HIGH
What changedThe company has finalized its FY26 audited accounts, recommended a 10% dividend, and scheduled its Annual General Meeting.
Why it mattersThe report highlights the company's ability to maintain profitability despite a revenue contraction, but also reveals a high management cost structure relative to its small-cap earnings base.
Revenue (FY26): Rs 148.98 CrNet Profit (FY26): Rs 2.40 CrDividend per share: Rs 1.00Chairman Remuneration: Rs 2.70 CrRemuneration vs PAT: 112.5%
📅 Short termThe stock may see minor interest leading up to the dividend record date of August 13, 2026.
📈 Long termStructural growth remains constrained by low operating margins (2%) and high executive compensation relative to the company's scale.
⚠ Risk flags
- High executive remuneration exceeding total net profit
- Thin operating margins (2.0%)
- Exposure to global steel price volatility and freight costs
Key Highlights
Revenue from operations decreased by 7% to Rs 148.98 Cr in FY26 from Rs 160.25 Cr in FY25.
Proposed final dividend of Rs 1 per share with a total payout of Rs 73.27 Lakhs.
Chairman Ramesh Chander Khandelwal's remuneration for FY26 was Rs 2.70 Cr, surpassing the company's PAT of Rs 2.40 Cr.
Record date for dividend eligibility is fixed for August 13, 2026, with the AGM on August 20, 2026.
Finance costs significantly reduced to Rs 1.41 Lakhs in FY26 from Rs 237.41 Lakhs in FY25.
👀 What to Watch
Investors should monitor the 32nd AGM on August 20, 2026, specifically regarding the ratification of director remuneration which currently exceeds net earnings. Watch for management commentary on how they plan to improve the thin 2% operating margins.
Metal Coatings India Proposes Rs 1 Dividend; AGM Set for Aug 20, 2026
Metal Coatings India has convened its 32nd Annual General Meeting (AGM) for August 20, 2026. The board has recommended a final dividend of 10% (Rs 1 per share) for FY26, totaling approximately Rs 0.73 Cr. Key agenda items include the re-appointment of Statutory Auditors for a five-year term and approval for material related party transactions with Khandelwal Busar Industries Private Limited. Notably, Director Ramesh Chander Khandelwal's FY26 remuneration of Rs 2.70 Cr is significantly high compared to the company's TTM PAT of Rs 2 Cr.
Confidence: HIGH
What changedThe company has scheduled its annual shareholder meeting and formalized proposals for dividend distribution and auditor re-appointments.
Why it mattersThis is a standard governance event, but the high director remuneration (exceeding annual PAT) and related party transactions are critical factors for minority shareholders in this micro-cap company.
Dividend per share: Rs 1Director Remuneration (FY26): Rs 2.70 CrRemuneration vs TTM PAT: 135%Total Dividend Payout: Rs 0.73 CrDividend Payout vs TTM PAT: 36.5%
📅 Short termThe stock may see minor activity around the dividend announcement, though the overall impact is expected to be neutral given the routine nature of the AGM.
📈 Long termThe high ratio of executive pay to net profit and ongoing related party transactions are structural governance points to watch over the coming years.
⚠ Risk flags
- High director remuneration relative to company profitability
- Material Related Party Transactions
- Micro-cap liquidity risks
Key Highlights
Proposed final dividend of 10% (Rs 1 per share) on 73,26,800 equity shares for FY26.
Approval sought for material related party transactions with Khandelwal Busar Industries Private Limited for the period until the 33rd AGM.
Director Ramesh Chander Khandelwal drew a remuneration of Rs 270.18 Lakh (Rs 2.70 Cr) in FY26.
Re-appointment of M/s. Mehra Goel & Co LLP as Statutory Auditors for a second 5-year term until the 37th AGM.
Cost Auditor remuneration for FY27 fixed at Rs 60,000 plus taxes.
👀 What to Watch
Investors should monitor the voting results, particularly regarding the material related party transactions and the high executive remuneration relative to the company's net profit.
Rs 1 Dividend: Metal Coatings India Sets August 13 as Record Date for FY26 Final Dividend
Metal Coatings (India) Ltd has announced a final dividend of Rs 1 per equity share for the financial year 2025-26, which is a 10% payout on its face value of Rs 10. The company has fixed August 13, 2026, as the record date to determine shareholder eligibility for both the dividend and e-voting. The 32nd Annual General Meeting (AGM) is scheduled for August 20, 2026, where the dividend will be formally approved. At the current share price of Rs 51.5, this represents a dividend yield of approximately 1.94%.
Confidence: HIGH
What changedThe company has finalized the administrative timeline for its annual dividend distribution and the 32nd Annual General Meeting.
Why it mattersThis announcement confirms the specific dates for cash distribution to shareholders and the formal process for annual corporate governance voting.
Dividend per share: Rs 1Face Value: Rs 10Record Date: August 13, 2026Dividend Yield: ~1.94%AGM Date: August 20, 2026
📅 Short termThe stock may experience minor price adjustments around the ex-dividend date in mid-August as the market factors in the Rs 1 payout.
📈 Long termLimited; this is a routine annual corporate action and does not signify a structural change in business operations.
Key Highlights
Final dividend of Rs 1 per equity share recommended for FY 2025-26
Record date for dividend eligibility and AGM voting fixed as August 13, 2026
Book closure period scheduled from August 14, 2026, to August 20, 2026
32nd Annual General Meeting to be held on August 20, 2026, via video conferencing
Remote e-voting window open from August 16, 2026, to August 19, 2026
👀 What to Watch
Investors interested in the dividend should monitor the ex-dividend date (typically one trading day prior to the August 13 record date) to ensure eligibility for the Rs 1 per share payout.
Metal Coatings India Ltd sets Aug 13 as Record Date for Rs 1 Dividend; 32nd AGM on Aug 20
Metal Coatings India Ltd has finalized the schedule for its 32nd Annual General Meeting (AGM) to be held on August 20, 2026. The Board has fixed August 13, 2026, as the record date for a final dividend of Rs 1 per equity share (10% of face value), which was previously recommended in May 2026. Additionally, the company has approved the re-appointment of Mehra Goel & Co LLP as statutory auditors for a second five-year term. Re-appointments for cost and internal auditors for the financial year 2026-27 were also confirmed.
Confidence: HIGH
What changedThe company has formalized the timeline for its annual shareholder meeting and the payout of its previously recommended dividend.
Why it mattersThis is a routine governance update that confirms the continuity of the audit team and provides specific dates for shareholder entitlements.
Final Dividend: Rs 1 per shareDividend as % of Face Value: 10%Record Date: August 13, 2026AGM Date: August 20, 2026Statutory Auditor Term: 5 years
📅 Short termThe stock may experience minor price adjustments around the August 13 record date as it goes ex-dividend.
📈 Long termLimited; the announcement reflects standard compliance and administrative procedures without indicating a change in business strategy.
Key Highlights
Final dividend of Rs 1 per equity share (Face Value Rs 10) recommended for FY 2025-26
Record date for dividend eligibility and e-voting fixed as August 13, 2026
32nd Annual General Meeting scheduled for August 20, 2026, at 12:30 P.M. IST
Statutory Auditor re-appointed for a 5-year term from the 32nd AGM until the 37th AGM
Remote e-voting period to run from August 16, 2026 (9 A.M.) to August 19, 2026 (5 P.M.)
👀 What to Watch
Investors seeking the Rs 1 dividend should ensure they hold shares by the August 13 record date. Review the upcoming Annual Report for FY 2025-26 to assess the company's operational performance given the 29.4% share price decline over the last 12 months.
Rs 1.00 Final Dividend: Metal Coatings India Sets Record Date for August 13, 2026
Metal Coatings India Ltd has finalized the schedule for its 32nd Annual General Meeting (AGM) to be held on August 20, 2026. The company has fixed August 13, 2026, as the record date for a final dividend of Rs 1 per equity share (10% of face value), which was previously recommended in May 2026. Additionally, the board has recommended the re-appointment of Mehra Goel & Co LLP as statutory auditors for a second five-year term. Re-appointments for cost and internal auditors for FY 2026-27 were also confirmed.
Confidence: HIGH
What changedThe company has moved from a dividend recommendation to fixing the specific record date and AGM timeline for payout and auditor re-appointments.
Why it mattersThis is a routine but necessary compliance step to facilitate the annual dividend payout and ensure continuity in the company's audit and governance functions.
Final Dividend: Rs 1 per shareFace Value: Rs 10Record Date: August 13, 2026AGM Date: August 20, 2026Statutory Auditor Term: 5 years
📅 Short termThe stock may see minor activity leading up to the August 13 record date as investors position for the dividend.
📈 Long termLimited structural impact as these are routine annual administrative and governance procedures.
Key Highlights
Final dividend of Rs 1 per equity share of face value Rs 10 approved for recommendation.
Record date for dividend eligibility and e-voting fixed as August 13, 2026.
Statutory auditor re-appointed for a second term of 5 consecutive years until the 37th AGM.
32nd Annual General Meeting scheduled for August 20, 2026, at 12:30 P.M.
Remote e-voting period set from August 16, 2026, to August 19, 2026.
👀 What to Watch
Investors should ensure their shareholding is recorded by August 13, 2026, to be eligible for the Rs 1 dividend, and monitor the AGM results on August 20 for formal approval.
